JUPITER: "Great Red Spot" Solved -- Part B
INJECTION-SUCTION CATHODE ASSEMBLY
The above is an enlarged SIBRAY cross-sectional view through the CATHODE ASSEMBLY area -- which is located on the right side of JUPITER as shown in the previous SIBRAY. The SIBRAY above shows the throat area of the injector and, on the left, a small area of the BUBBLE. In the center of the throat area is the CELL CONVERTER and on the right, the CATHODE UNIT. In this view, at least three different types of Egg Element Cells including Invisible and well as Visible, are being taken from a supply exterior of JUPITER (shown initially in red and green; once converted then in red, lavender and purple); then each cell is converted and encapsulated; receive a positive charge if required; proceed through the neck of the injection area as a result of being attracted by the extremely powerful negative magnetic field force toward the ANODE ASSEMBLY on the left perimeter of JUPITER.
The above is an increased enlargement of the "CATHODE UNIT" identified in the previous SIBRAY above. This assembly provides on those Egg Element Cells which require it, a positive charge prior to the Cells being converted and encapsulated in the CELL CONVERTER unit.
The above is a sampling of the SIB Egg Element Cells making up the CATHODE UNIT which provides a positive charge to the Cells to be Injected.
The above is an additional enlargement of the CELL CONVERTER and ENCAPSULATION unit. Although somewhat difficult to understand the process, the Egg Cells enter from both above and below the right side of the unit. The Cell conversion and encapsulation progresses from right to left. The Egg Cell nearest the EXIT is nearing completion of conversion and encapsulation and when completed will exit to be drawn by negative magnetic attraction into and increasing the size of the BUBBLE.
This is a SIBRAY cross-section of an Egg Element Cell just prior to entering the CELL CONVERTER and ENCAPSULATION unit. These Cells are somewhat different than the Cells we are used to seeing and photographing throughout the Universe.
The above is a SIBRAY sampling of some of the converted and encapsulated Egg Element Cells immediately after being attracted by negative magnetic force and SUCKED into the "BUBBLE". The SIBRAY process has cut approximately half way down into their shells or encasements revealing the makeup of their interior. They also are quite different than we are used to seeing suspected because, in this case they have a much higher charge on them than usual and having just undergone the process of conversion, encapsulation and injection.
This action, coupled with all the other actions involved in this INJECTION-SUCTION process carried out by the SIBs for the specific purpose to increase the mass and size of JUPITER is the absolute, positive cause of the GREAT RED SPOT.
Contrary to the mistaken beliefs of OSPs including NASA, the GREAT RED SPOT is not caused by a "raging storm". Instead, the GREAT RED SPOT is a WHIRLPOOL VORTEX created as a result of the astonishing INJECTION-SUCTION process being carried out by our friends and the benefactors of all Mankind, the SUPER INTELLIGENT, SUPER CAPABLE SIBs.
